Extrusion Blow Molding Machine for 20L HDPE Jerrycan

Product Detail

Product name: Fully automatic extrusion blow molding machine(Accumulator) TDB-25A

Extrusion blow molding machine technical specification:

Model		TDB-25A
Station		Single station
Max. Product Volume	(L)	25L
Dry cycle	(pc/h)	600
Screw Diameter	(mm)	80
Screw L/D ratio	(L/D)	25
Screw drive power	(KW)	30
Screw heating capacity	(KW)	6.2~8.2
No. of heating zone	(ZONE)	4
Max.Output of HDPE	(Kg/hr)	90~130
Oil pump drive power	(KW)	22
Clamping force	(KN)	215
Mold stroke (Platen distance)	(mm)	350~780
Max. Size of Mold(W*H)	(mm)	550*650
Capacity of the diehead	(L)	4
Max. Die diameter	(mm)	300
Die heat capacity	(KW)	5.28
No. of heating zone	(ZONE)	4
Blowing pressure	(Mpa)	0.8
Air volume	(M3/MIN)	0.8
Cooling water pressure	(Mpa)	0.3
Water consumption	(L/MIN)	60
Size of machine ( L*W*H)	(m)	4.1*2.2*3.5
Weight of machine	(TON)	11




Extrusion blow molding machine samples:

     




   




   

Extruson blow molding machine suppliers of main parts:

a) Hydraulic Parts

Name	Supplier
Oil Pump	PARKER or SUNNY, America
Valve	YUKEN or SUNNY
Hose, Joint	PARKER SIR
Sealer	Top DZ Europe

b) Electrical Parts

Name	Supplier
Microcomputer Control System	MITSUBISHI PLC, Japan
Touch Screen	HITECH color screen, Taiwan
Temperature Controller	MITSUBISHI, Japan
Conductor	SCHNEIDER
Air Switch	SCHNEIDER
Motor	SIMENS BEIDE Asynchronous Motor
Power Resource	MEAN WELL, Taiwan
Inverter	MITSUBISHI

c) Pneumatic Parts

Name	Supplier
Solenoid Valve	FESTO, Germany
Cylinder	FESTO, Germany




Extrusion blow molding machine shipping and workshop:





Extrusion blow molding machine technical feature:

The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.

The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.

The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.

The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.

The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.

Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products.

Extrusion blow molding machine installation, commissioning and training:

If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it's about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$80 per day. And all accommodation, visa application & air ticket will be born by the buyer.